PRODUCT
제품소개
지멘스 제품군

LOGO PLC

S7-200 PLC

S7-1200 PLC

S7-300 PLC

S7-400 PLC

S7-400H(이중화) PLC

SAFETY PLC

HMI PANEL

IPC

SINAMICS DRIVE

G120

S120

ET200 Remote

V20

엘모스 제품군

문의메일 : Mail to admin
팩스 : 031-385-4551
- 평일 : 오전 09:00 ~18:00 까지
- 점심시간 : 오후 12:00 ~ 13:00 까지
- 토/일요일/ 공휴일은 휴무 입니다
 지멘스 제품군
제품소개 > 지멘스 제품군

CPU 319-3 PN/DP
6ES7318-3EL00
S7-300을 사용하면 공간이 절약되고 모듈식 구성이 가능합니다. 모듈 외에 모듈을 설치하고 제 자리에 고정하는 데 DIN 레일만 있으면 됩니다. 그 결과 견고하고 EMC를 준수하는 설계가 가능합니다. 필요 시 장착하는 백플레인 버스는 추가 모듈과 버스 커넥터를 꽂기만 하면 확장할 수 있습니다. S7-300의 다양한 범위는 ET 200M을 사용하여 분산된 구조의 중앙 확장 또는 구성에 사용할 수도 있으므로 매우 비용 효과적인 예비 부품 취급을 가능하게 합니다.

제품상세보기
The CPU 319-3 PN/DP is equipped with the following:
  • Multi-processor system
  • High command processing and communications performance
  • 2 MB work memory (corresponds to approx. 680 K instructions);
    the extensive work memory for program components relevant to execution offers sufficient space for user programs. SIMATIC Micro Memory Cards (8 MB max.) as load memory for the program also allow the project to be stored in the CPU (complete with symbols and comments) and can be used for data archiving and recipe management.
  • Flexible expansion capability;
    max. 32 modules (4-tier configuration)
  • Combined MPI/DP interface;
    The first MPI/DP integrated interface can establish as many as 32 connections simultaneously to S7-300/400 or connections to PG, PC, OP. Of the connections, one is permanently reserved for programming devices and one for OPs.
    The MPI supports simple networking of up to 32 CPUs over "Global data communication".
    This interface can be reconfigured from MPI interface to DP interface.
    PROFIBUS DP interface:
    The PROFIBUS DP V1 standard is fully supported. This increases the scope of DP V1 standard slaves in terms of diagnostics and parameterization capability.
  • DP interface;
    the second DP integrated interface can establish as many as 32 connections simultaneously to S7-300/400 or connections to PG, PC, OP. One of the connections is permanently reserved for PG and one for OP.
    The DP interface can be used as DP master or DP slave. PROFIBUS DP slaves can be operated in isochronous mode at this interface. The PROFIBUS DP V1 standard is fully supported. This increases the scope of DP V1 standard slaves in terms of diagnostics and parameterization capability.
  • Ethernet interface;
    The third integrated interface of the CPU 319-3 PN/DP is a PROFINET interface with 2-port switch based on Ethernet TCP/IP. It supports the following protocols:
    • S7 communication for data communication between SIMATIC controllers
    • PG/OP communication for programming, commissioning and diagnostics through STEP 7
    • PG/OP communication for interfacing to HMI and SCADA
    • Open TCP/IP, UDP and ISO-on-TCP (RFC1006) communication over PROFINET
    • SIMATIC NET OPC-Server for communication with other controllers and I/O devices with own CPU
상호 : 센서즈엔솔루션즈(주)  사업장주소 : 경기도 안양시 동안구 비산동 1107-1 안양벤처텔 1010~1 호 (우) 431-050   
대표안내전화 : 031-385-4547~9   FAX :  031-385-4551   
Copyright ⓒ 2019 Sensors and Solutions Co., Ltd.. All rights reserved. Mail to admin