지멘스 제품군


S7-200 PLC

S7-1200 PLC

S7-300 PLC

S7-400 PLC

S7-400H(이중화) PLC







ET200 Remote


엘모스 제품군

문의메일 : Mail to admin
팩스 : 031-385-4551
- 평일 : 오전 09:00 ~18:00 까지
- 점심시간 : 오후 12:00 ~ 13:00 까지
- 토/일요일/ 공휴일은 휴무 입니다
 지멘스 제품군
제품소개 > 지멘스 제품군

CPU 224 XP
SIMATIC S7-200 Micro PLC는 그 자체로 하나의 클래스입니다. 매우 소형이면서 탁월한 기능을 갖추고 있으며 특히 실시간 성능이 뛰어납니다. 빠르고 향상된 통신 옵션이 있으며 하드웨어와 소프트웨어를 조작하기 쉽게 되어 있습니다. 하지만 다음과 같은 기능도 있습니다. SIMATIC S7-200 Micro PLC는 현재 너무 크지도 않고 미래에 언제든지 확장할 수 있을만큼 충분한 확장 기능이 있는 맞춤형 솔루션을 위해 모듈식 디자인을 고수하고 있습니다. 이러한 모든 특징들이 SIMATIC S7-200 Micro PLC를 소형 성능 범위에서 자동화된 제어를 위한 매우 효율적이고 경제적인 솔루션으로 만들어줍니다.

The CPU 224 XP and CPU 224 XPsi are equipped with:
  • Integral 24 V encoder/load current supply:
    For direct connection of sensors and encoders. With 280 mA, output current can also be used as load power supply.
  • CPU 224 XP:
    2 device variants with different supply and control voltages.
    CPU 224 Xpsi:
    1 device variant (24V DC) with current sinking.
  • Integral digital inputs/outputs:
    14 inputs and 10 outputs.
  • Integral analog inputs/outputs:
    2 inputs and 1 output.
  • 2 communication interfaces:
    • As PPI interface with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication (9.6/19.2/187.5 Kbit/s) or as MPI slave for data exchange with MPI masters (S7-300/-400, OPs, TDs, pushbutton panels).
    • Freely-programmable interface (freeport) with interrupt facility for serial data exchange with third-party devices, e.g. with ASCII protocol baud rates 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2 Kbit/s; PC/PPI cable can be used as RS 232/RS 485 converter.
  • Expansion bus:
    Connection of expansion modules (only EMs of the 22x series can be used).
  • Interrupt inputs:
    For extremely fast response to rising or falling edges of process signals.
  • Fast counters:
    6 fast counters (2x200 kHz, 4x400 kHz), with parameterizable enable and reset input, can be used simultaneously as up and down counters with 2 separate inputs or for connecting incremental encoders with 2 pulse trains (2x100 kHz, 2x20 kHz) offset by 90o.
  • Problem-free expansion with digital and analog expansion modules (EM, optional).
  • Simulator (optional):
    For simulating the integral inputs and for testing the user program.
  • Analog potentiometer:
    2 analog potentiometer, can be conveniently used in everyday work as a setpoint encoder, e.g. for setting times.
  • Pulse outputs:
    2 high-frequency pulse outputs (max. 100 kHz); can be used for positioning tasks and for driving frequency-controlled motors and stepping motors via power circuitry.
  • Real-time clock:
    e.g. for assignment of time stamps to messages, for recording machine runtimes, or for time control of processes.
  • EEPROM submodule (optional):
    For saving the complete STEP 7-Micro/WIN user program as well as other documents.
    For supporting the data logging function and recipe management.
    Permits fast changing of program (even without programming device) and additional program archiving.
  • Battery module for long-term backup:
    To increase the storage period up to typically 200 days. Without a battery module, user data (e.g. bit memory states, data blocks, times, counts) are saved by an internal high-performance capacitor for approx. 5 days. The program is always saved permanently (maintenance-free). The battery module is inserted into the slot for the memory submodule.
상호 : 센서즈엔솔루션즈(주)  사업장주소 : 경기도 안양시 동안구 비산동 1107-1 안양벤처텔 1010~1 호 (우) 431-050   
대표안내전화 : 031-385-4547~9   FAX :  031-385-4551   
Copyright ⓒ 2019 Sensors and Solutions Co., Ltd.. All rights reserved. Mail to admin